2 Barrel Aisan for Toyota 22r/2366 CC motor
BUY DIRECT & SAVE! We will give you a core refund on your "original" same as ours old carb the core value is 40.00 ask us how that works.
This is an original 2 barrel aisan carburetor for most 22r/2366 cc motor
This carburetor has a round connector !! This carburetor is completely remanufactured with new gaskets and needle and seat and other parts, throttle bushings are repaired to avoid vacuum leaks. Because we are a true carburetor shop,every carburetor gets bench tested and adjusted befor being sent to you. And comes with 6 months warranty. Help us recycle !!!
Here are the following applications that will fit this unit celica & corona 1981-1982 man tran only 1983 all note: 1981-1982 auto trans is my part # 3590 pick up 1981-1984 all man/auto trans (except) 1982 light duty 2 wheel drive that would be my part # 3590 1985-1987 man trans if your carburetor still has the original oem tag number write back and we will confirm this is the correct carb for you.
If you have any questions or need any other kind of toyota carburetor please feel free to call us
714-928-6003
carbcareusa@hotmail.com
4MV Rochester early 70’s Chevy 350
BUY DIRECT & SAVE! The charge includes a 40.00 refundable core deposit
This is a Rochester Quadrajet 4mv manifold coil choke model made for early 70's chevy pick up's
THE PRICE INCLUDES DIECHROMATE FINISH
Please email or call us with your oem carburetor number to see if it will interchange with the one you need. Every carburetor comes bench tested and adjusted with a base gasket and comes with 6 months warranty.
TO PLACE ORDER BY PHONE 714-928-6003
800CFM Performance Rochester QJET
What we have here is the best quality of a performance carburetor at a great price !!
- This carburetor was made for moderately modified street performance vehicles
- All circuits will be modified and tuned to match the specifications of your engine combination, including:
- Idle down tube(idle jet) and idle air bleed resized for smooth idle quality with performance camshafts.
- Main jet and metering rods selected for clean cruise mixture and strong part throttle response and acceleration.
- Proper metering rod power piston spring selected to match engine vacuum characteristics
- Secondary metering rods and hanger selected and high speed air bleeds resized for maximum full throttle horsepower and torque.
- We choose the highest quality cores for best performance and reliability
- Strip to bare metal, inspect for defects, then apply dichromate coating for brilliant gold finish.
- All hardware is strip and cadmium plate all hardware, including throttle shafts, linkage, levers, spring and screws.
- Install bushings in baseplate to eliminate any potential vacuum leaks at primary throttle shaft.
- Install adjustable part throttle to allow adjustment of part throttle and cruise speed (steady throttle, 1800-4000 rpm) air/fuel mixture in seconds without any disassembly, tuning can be done while engine is running!
- Apply epoxy to main body casting plug to eliminate common "leak down" problem associated with quadrajets.
- Idle, transition, main, and high speed circuits modified to provide optimum fuel curve for your engine
- Assembled using the highest quality components, including:
- New jets and metering rods.
- High capacity accelerator pump featuring materials that are resistant to alcohol and other additive commonly found in today's fuel
- New float that can't crack or sink.
- Quality gaskets
- High flow .130" needle and seat assembly.
- New electric choke for cold starting.
- New choke pull-off .
Autolite/Motorcraft 2100 Mustang
BUY DIRECT & SAVE! The price includes a 30.00 refundable core deposit
This is an original !!!!
Autolite 2 barrel 2100 model for the ford 8 cyl mustang and ford's with 260/289/292 motor
from 1967 to 1969 except fairlane,falcon and mercury
(please visit our policy page for more info on core refund)
714-928-6003
M4MC Rochester Quadrajet (Chevy/GMC 350 and 305)
BUY DIRECT & SAVE! the price includes a 40.00 refundable core deposit.
This is a Rochester Quadrajet M4MC carburetor that replaces the OEM 17080213 or most Rochesters for chevy/gmc 350 and 305 from 1980 to 1985 with climatic choke.
Please email or call us with your application or OEM number to see if it apply's.
Every carburetor is factory made to specs and is bench tested and adjusted and comes with a base gasket and 6 months warranty.
Rochester B Model Hand Choke 216 CI Motor Chevy/GMC Truck 1937-1953
BUY DIRECT & SAVE! The price includes a 60.00 refundable core deposit. You also get a base gasket and comes with 6 months warranty
Don't risk buying false advertise carburetors that say they are new !
We have the original Rochester B Model Hand Choke, these carburetors are remanufactured.
This carburetor fits the chevy and gmc 216 ci motor and is bench tested and adjusted to factory specs and has all internal parts new and throttle bushings are repaired to avoid vacuum leaks.
If you don't know what carb you need feel free to email or call us (call or email us about the core deposit)
714-928-6003
Rochester Dualjet Feedback System 81/85 6cyl
Rochester E4ME with Feedback System 1980-1990
BUY DIRECT & SAVE! The price includes a 50.00 refundable core deposit
We have the largest inventory of auto and marine carburetors (Please visit my policy page for more info on core refunds)
Fits majority of gm's 305, 350, 5.0 and 5.7 engines.
- This carburetor comes standard on general motors from 1980-1990 with a feedback system(sensors).